1100 Aluminum Coil Stock

UNS A9100
QQA 250/1

This alloy is an aluminum-based alloy in the "commercially pure" wrought family. With a minimum of 99.0% aluminum, it is the most heavily alloyed of the 1000 series. It is also the mechanically strongest alloy in the series, and is the only 1000-series alloy commonly used in rivets. At the same time, it keeps the benefits of being relatively lightly alloyed (compared to other series), such as high electrical conductivity, corrosion resistance, and workability. It can be strengthened by cold working, but not by heat treatment. HVAC, condenser, radiator, evaporator, heat shield, deep drawn applications, spinning, fan blades, nameplates and sheet metal work are typical applications.

WHY CHOOSE ALMETALS

TemperO

TemperH12

TemperH14

TemperH16

TemperH18

TemperH19

Find My Metal

Inventory

MECHANICAL PROPERTY LIMITS

Temper	Specified Thickness(in)	Tensile Strength - KSI				Elongationin 2 inches %
		Ultimate		Yield
		Min	Max	Min	Max
H12	0.017 - 0.019	14	19	11	-	3
H12	0.020 - 0.031	14	19	11	-	4
H12	0.032 - 0.050	14	19	11	-	6
H12	0.051 - 0.113	14	19	11	-	8
H12	0.114 - 0.250	14	19	11	-	9
H14	0.009 - 0.012	16	21	14	-	1
H14	0.013 - 0.019	16	21	14	-	2
H14	0.020 - 0.031	16	21	14	-	3
H14	0.032 - 0.050	16	21	14	-	4
H14	0.051 - 0.113	16	21	14	-	5
H14	0.114 - 0.250	16	21	14	-	6
H16	0.006 - 0.019	19	24	17	-	1
H16	0.020 - 0.031	19	24	17	-	2
H16	0.032 - 0.050	19	24	17	-	3
H16	0.051 - 0.162	19	24	17	-	4
H18	0.006 - 0.019	22	-	-	-	1
H18	0.020 - 0.031	22	-	-	-	2
H18	0.032 - 0.050	22	-	-	-	3
H18	0.051 - 0.128	22	-	-	-	4
H19	0.006 - 0.063	24	-	-	-	1
O	0.006 - 0.019	11	15.5	3.5	-	15
O	0.020 - 0.031	11	15.5	3.5	-	20
O	0.032 - 0.050	11	15.5	3.5	-	25
O	0.051 - 0.249	11	15.5	3.5	-	30

CHEMICAL COMPOSITION LIMITS (%)

Si Silicon	Fe Iron	Cu Copper	Mn Manganese	Mg Magnesium	Cr Chromium	Ni Nickel	Zn Zinc	Ti Titanium	Others Each	Total	Total Aluminum Min
0.95	-	0.05 - 0.2	0.05	-	-	-	0.1	-	0.05	-	99

Chemical composition is percent maximum unless shown as a range or a minimum.
Source: Aluminum Standards and Data – The Aluminum Association, Inc.
Information presented as a guide for reference purposes only and is not intended to be used for product design or application.

Aluminum Association
wikipedia.org

Aluminum Slitting Capabilities

Gauge Range

.004" to .187" (.102 mm to 4.750 mm)

Width Range

.250" to 60" (6.365 mm to 1524 mm)

8, 12, 16 or 20 (inches)

78" maximum

Coil Weight

40,000 lbs maximum

Cut-to-Length Capabilities

Gauge Range

.015 to .060 (.381 mm to 1.524 mm)

Width Range

8” - 48” (203 mm to 1.219 mm)

Length Range

12” to 144” (305 mm to 3.658 mm)