facebook_icon
Metals > Aluminum > 5005 > H34

Aluminum 5005 H34

MECHANICAL PROPERTY LIMITS
Specified Thickness(in) Tensile Strength - KSI Elongationin 2 inches %
Ultimate Yield
Min Max Min Max
0.009 - 0.012 20 26 15 - 2
0.013 - 0.031 20 26 15 - 3
0.032 - 0.050 20 26 15 - 4
0.051 - 0.113 20 26 15 - 5
0.114 - 0.161 20 26 15 - 6
0.162 - 0.250 20 26 15 - 7
CHEMICAL COMPOSITION LIMITS (%)
Si
Silicon
Fe
Iron
Cu
Copper
Mn
Manganese
Mg
Magnesium
Cr
Chromium
Ni
Nickel
Zn
Zinc
Ti
Titanium
Others
Each
Total
 
Total
Aluminum Min
0.3 0.7 0.2 0.2 0.5 - 1.1 0.1 - 0.25  0.10  0.05 0.15 Remainder
  • Chemical composition is percent maximum unless shown as a range or a minimum.
  • Source: Aluminum Standards and Data – The Aluminum Association, Inc.
  • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.
Aluminum Slitting Capabilities
Gauge Range
.004" to .187" (.102 mm to 4.750 mm)
Width Range
.250" to 60" (6.365 mm to 1524 mm)
ID
8, 12, 16 or 20 (inches)
OD
78" maximum
Coil Weight
40,000 lbs maximum
Cut-to-Length Capabilities
Gauge Range
.015 to .060 (.381 mm to 1.524 mm)
Width Range
8” - 48” (203 mm to 1.219 mm)
Length Range
12” to 144” (305 mm to 3.658 mm)