facebook_icon
Metals > Aluminum > 5005

5005 Aluminum Coil Stock

UNS A 95005

5005 aluminium alloy is an aluminium alloy with good resistance to atmospheric corrosion. It is used in decorative and architectural applications. It is a member of the 5000 series of aluminum-magnesium wrought alloys. As such, it is not used in casting. It can attain moderate to high strength by cold working, and has relatively high welded strength, workability, and corrosion resistance compared to other aluminum alloy families.  Where anodizing is needed, 5005 is specified for applications similar to 1100 and 3003.

Slitting Capabilities
Gauge Range
.004" to .190" (.102 mm to 4.826 mm)
Width Range
.250" to 60" (6.365 mm to 1524 mm)
ID
8, 12, 16 or 20 (inches)
OD
78" maximum
Coil Weight
40,000 lbs maximum
Cut-to-Length Capabilities
Gauge Range
.015 to .060 (.381 mm to 1.524 mm)
Width Range
8” - 48” (203 mm to 1.219 mm)
Length Range
12” to 144” (305 mm to 3.658 mm)
MECHANICAL PROPERTY LIMITS
Temper Specified Thickness(in) Tensile Strength - KSI Elongationin 2 inches %
Ultimate Yield
Min Max Min Max
H112 0.250 - 0.499 17 - - - 8
H112 0.500 - 2.000 15 - - - 12
H112 2.001 - 3.000 14.5 - - - 18
H12 0.017 - 0.019 18 24 - - 2
H12 0.020 - 0.031 18 24 - - 3
H12 0.032 - 0.050 18 24 - - 4
H12 0.051 - 0.113 18 24 - - 6
H12 0.114 - 0.161 18 24 - - 7
H12 0.162 - 0.249 18 24 - - 8
H12 0.250 - 0.499 18 24 - - 9
H12 0.500 - 2.000 18 24 - - 10
H14 0.009 - 0.031 21 27 - - 1
H14 0.032 - 0.050 21 27 - - 2
H14 0.051 - 0.113 21 27 - - 3
H14 0.114 - 0.161 21 27 - - 5
H14 0.162 - 0.249 21 27 - - 6
H14 0.250 - 0.499 21 27 - - 8
H14 0.500 - 1.000 21 27 - - 10
H16 0.006 - 0.031 24 30 - - 1
H16 0.032 - 0.050 24 30 - - 2
H16 0.051 - 0.162 24 30 - - 3
H18 0.006 - 0.031 27 - - - 1
H18 0.032 - 0.050 27 - - - 1
H18 0.051 - 0.128 27 - - - 3
H32 0.017 - 0.019 17 23 - - 3
H32 0.020 - 0.031 17 23 - - 4
H32 0.032 - 0.050 17 23 - - 5
H32 0.051 - 0.113 17 23 - - 7
H32 0.114 - 0.161 17 23 - - 8
H32 0.162 - 0.249 17 23 - - 9
H32 0.250 - 2.000 17 23 - - 10
H34 0.009 - 0.012 20 26 - - 2
H34 0.013 - 0.031 20 26 - - 3
H34 0.032 - 0.050 20 26 - - 4
H34 0.051 - 0.113 20 26 - - 5
H34 0.114 - 0.161 20 26 - - 6
H34 0.162 - 0.249 20 26 - - 7
H34 0.250 - 0.499 20 26 - - 8
H34 0.500 - 1.000 20 26 - - 10
H36 0.006 - 0.007 23 29 - - 1
H36 0.008 - 0.019 23 29 - - 2
H36 0.020 - 0.031 23 29 - - 3
H36 0.032 - 0.162 23 29 - - 4
H38 0.006 - 0.012 26 - - - 1
H38 0.013 - 0.019 26 - - - 2
H38 0.020 - 0.031 26 - - - 3
H38 0.032 - 0.128 26 - - - 4
H39 0.006 - 0.063 28 - - - 1
O 0.006 - 0.007 15 21 - - 12
O 0.008 - 0.012 15 21 - - 14
O 0.013 - 0.019 15 21 - - 16
O 0.020 - 0.031 15 21 - - 18
O 0.032 - 0.050 15 21 - - 20
O 0.051 - 0.113 15 21 - - 21
O 0.114 - 0.249 15 21 - - 22
O 0.250 - 3.000 15 21 - - 22
CHEMICAL COMPOSITION LIMITS (%)
Si
Silicon
Fe
Iron
Cu
Copper
Mn
Manganese
Mg
Magnesium
Cr
Chromium
Ni
Nickel
Zn
Zinc
Ti
Titanium
Others
Each
Total
 
Total
Aluminum Min
0.3 0.7 0.2 0.2 0.5 - 1.1 0.1 - 0.25  0.10  0.05 0.15 Remainder
  • Chemical composition is percent maximum unless shown as a range or a minimum.
  • Source: Aluminum Standards and Data – The Aluminum Association, Inc.
  • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.
  • Aluminum Association
     wikipedia.org
Almetals is a world-class specialty aluminum supplier and metal supplier slitter and distributor for industries such as stamping, roll forming, and tube producers. Our coil products include: aluminum, brass & copper, clad metals, cold rolled, fin stock, and coated & stainless steels.
51035 Grand River Avenue
Wixom
Michigan
48393
United States