facebook_icon
Metals > Aluminum

Aluminum Suppliers

Slitting Capabilities
Gauge Range
.004" to .190" (.102 mm to 4.826 mm)
Width Range
.250" to 60" (6.365 mm to 1524 mm)
ID
8, 12, 16 or 20 (inches)
OD
78" maximum
Coil Weight
40,000 lbs maximum
Cut-to-Length Capabilites
Gauge Range
.015 to .060 (.381 mm to 1.524 mm)
Width Range
8” - 48” (203 mm to 1.219 mm)
Length Range
12” to 144” (305 mm to 3.658 mm)

Standard Tolerances

Gauge

0.0829 - 0.072 +/- 0.004  0.0259 - 0.011 +/- 0.0015 
0.0719 - 0.040 +/- 0.003 0.0109 - 0.007 +/- 0.001
0.0399 - 0.026 +/- 0.002 0.0069 - 0.004 +/- 0.0005
Width Gauge Range Gauge Range
(0.004-0.069) (0.070-0.125)
0.500 - 5.999 +/- 0.005  +/- 0.008 
6.000 - 8.999 +/- 0.005 +/- 0.010
9.000 - 11.99 +/- 0.010 +/- 0.010
12.00 - 19.99 +/- 0.016 +/- 0.016
20.00 - 60.00 Commercial Commercial

Camber

.006-.064 x .500-1" (3/4" in 6')
x 1.01-2" (9/16" in 6')
x 2.01-4" (3/8" in 6')
x 4.01-10" (1/4" in 6')
x over 10" (3/16" in 6')
.065-.125 x 2.01-4" (3/8" in 6')
x 4.01-10" (1/4" in 6')
x over 10" (3/16" in 6')
  • Camber is to be determined by placing an 8ft. straight edge against the concave edge of the strip.
  • Camber is the greatest deviation of the side edge from a straight line; the measurement being taken on the concave side with a straight edge.

Length

  Width Length Tolerance
Under: 0.1874 (inches) < 48.00 (inches) < 120 (inches) (+0.250 / -0.000)
Over: 0.1874 (inches) > 48.00 (inches) > 120 (inches)  (+0.500 / -0.000)

Finishes

  • Standard Mill 
  • 1 or 2 Sides Matte
  • Preferred Mill
  • Anodize Quality
  • 1 or 2 Sides Bright
  • Painted

Tempers

  • Annealed
  • 1/4 Hard
  • 1/2 Hard
  • 3/4 Hard
  • Full Hard
Almetals is a world-class specialty aluminum supplier and metal supplier slitter and distributor for industries such as stamping, roll forming, and tube producers. Our coil products include: aluminum, brass & copper, clad metals, cold rolled, fin stock, and coated & stainless steels.
51035 Grand River Avenue
Wixom
Michigan
48393
United States